350 Gallon Air Cooled Lubrication System

Air Cooled Lubrication System

Base mounted nominal 350 gallon capacity reservoir complete with a full containment drip tray.
- Electric immersion type oil heater c/w integral thermostat.
- Suction strainers for each lube and lift pump
- Oil level sight gauge
- Low oil level float switch
- Mechanical local oil temperature gauge
- Sealed filler neck (recommend force fill through included filter port)
- Filtered breather assembly
- Drain ports for reservoir and drip tray
- Kidney loop filtration/cooling circuit
- Low pressure gear pump (20 gpm)
- Coupling and pump to motor bell housing
- Electric motor 1.5 HP 1800 RPM
- Air cooler c/w 1/2 HP electric motor
- 10 micron "bag style" filter
- Check valve (65 lbs)
- Low pressure lubrication circuit components
- Tandem 12GPM X2 (100 PSI) lube pump
- 5HP Electric motor 1200 RPM
- Shaft coupling
- Pump to motor bell housing
- Relief valves
- Discharge check valves
- Pressure gauges
- 10 micron "bag style" filter for each branch
- Flow switch and indicator for each branch
- Discharge check valves for each branch
- High pressure lift circuit components
- Tandem 3 GPM X2 (3000 PSI) lifting pump
- 15 HP Electric motor 1200 RPM
- Shaft coupling
- Pump to motor bell housing
- High pressure filter assembly for each branch
- Relief valve for each branch
- Pressure switch for each branch
- Pressure gauge for each branch
- Discharge check valves for each branch

All of the above will be mounted, properly piped and plumbed to make a single unit. The unit will have 2 X termination for lube supply to mill, 2 X termination for lift supply to mill, 2 X termination for sump returns from mill, 1 termination for oil top-up / filling through the filter. The unit will have legs, lifting lugs and be painted standard Multi-Power Blue. Field piping, bearing terminations, electrical device wiring, and lube oil is not included in the price. (We can quote these and any other misc. items separately upon request to do so) All Units are made to order and can be modified to the clients needs.